4/15/2013 6:23 AM
A fairly common complaint that I hear in my office is that of patients saying that their heel is slipping up inside one or more shoes when they wear their orthotic devices. This is usually a very easy problem to address and one that every orthotic practitioner should be aware of.
Dr. Jenny Sanders just wrote an excellent blog for podiatry today on how to use lacing techniques and tongue pads to decrease heel slippage. You can read her blog here.
One important technique I would add to Dr. Sanders’ list is to use a grinder to thin the heel of the orthoses. If you have a polypropylene orthoses, you can simply take it to a grinder and grind the bottom of the heel post or, if there is no heel post, the heel contact point of the orthoses. Grind so that it is almost paper thin. One of the nice attributes of polypropylene is that it will not crack after grinding. I will usually grind the device to a point where the polypropylene is very slightly pliable and will move slightly with finger pressure. At that point, I know it is as thin as I can make it without grinding all the way through the orthosis.
Even decreasing the heel contact thickness by a millimeter or so can make a tremendous difference in eliminating heel slippage.
ProLab takes a scientific approach with our orthoses by integrating evidence-based medicine into orthotic therapy. Our team of Medical Consultants regularly evaluates the medical literature pertaining to orthotic therapy and biomechanics. ProLab clients are encouraged to contact a medical consultant whenever they have questions about an orthotic prescription.
For an easy way to stay up-to-date on evidence-based orthotic therapy, subscribe to our free E-Journal. Your will receive a monthly email synopsis of the research that impacts your practice.